Coilovers BMW M8 F91, F92

Performance, high comfort and sporty handling with racing technology for the road. Separately adjustable compression and rebound damping.

The KW height adjustable spring kit is used for lowering of the vehicle in combination with the standard dampers. Unlike to conventional spring kits, a customized height adjustment is possible within the tested adjustment range. For this solution, vehicle-specific spring seats with adapted KW lowering springs and matching elastomers as well as dust protection systems are used. The standard damper system for example with electronic or hydraulic control, continues to remain active.

For the installation of systems D1, D2, DZ and DZX we recommend ST wheel bolts in black or silver. Note that the length of the bolts depends on the thickness of the selected wheel spacer. In addition the type of screw seat and thread must be considered. Important note! Minimum thread engagement must be considered: M12x1,25 at least 8,0 turns M12x1,5 at least 6,5 turns M12x1,75 at least 6,5 turns M14x1,25 at least 9,0 turns M14x1,5 at least 7,5 turns 1/2“ at least 8,0 turns Caution: Wheel bolts that are too long may cause damage at the axle components!

ST DZX Wheel Spacers allow you to widen the track width in precise 2.5mm increments of 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm, 45 mm and 50 mm per axle (5 mm, 7.5 mm, 10 mm, 12.5 mm, 15 mm, 20 mm, 22.5 mm or 25 mm per wheel). Patented adapter system.